What type golf clubs should i buy

This means paying attention to the distance you typically hit each club in your bag, and specifically the gaps between them. If you have any noticeable gaps, it may be worth adjusting your set configuration. One of the great benefits of buying clubs today, is the option to try clubs and visit demo days. We could not recommend this highly enough. Just finding the right clubs for you is fine, but unless you actually use them and see how they hit then you may never be sure you are getting the perfect set.

Custom fitting is a service offered by all the major manufacturers. The ability to adapt the specifications of irons to match your size and swing is a very useful method of buying clubs. The average set is designed for a player who is around cm 5 foot 10 inches tall. If you are not this height it is likely that you would benefit from custom fitting. Fitting involves customising the length of shaft and lie as the taller you are the longer shaft you will require and you may perhaps need a more upright lie.

The shaft stiffness can also be adjusted to suit your swing speed so that the club does not arrive too open or shut at impact. Even the head design can be custom fitted to your swing and desired shots. Custom fitting will take approximately 30 to 60 minutes at your local pro shop or golf shop. Some manufacturers also have fully equipped fitting centres with all the latest technology to fit you like a Tour Pro. It can cost you a little more than buying a standard set of clubs, however many manufacturers will do this for free if you end up buying a set with them.

Ultimately any small cost will probably save you money in the long run, as you will have a set perfectly fitted for you. Demo days where manufacturers offer all golfers the chance to try out all their latest equipment and get advice on specifications and any other questions you might have.

Some demo days even have custom fitting trucks with computer analysis equipment to analyse you swing and build you a club to order there and then. Great for someone looking to drop down from a cast cavity-back iron to a forged model, but who isn't brave enough to go for a full blade. Sign in or Register with Golfalot. Cast Irons The alternative to forged irons is the cast iron.

Cavity Back Irons A cavity back iron is a club that positions a recess or cavity in the back of the head, concentrating more weight on the perimeter. Sets Of Irons Irons are usually sold in sets of up to 9 irons. Shafts Steel Shafts The most commonly chosen shaft for irons is steel.

Graphite Shafts Not as common as steel in the iron market, graphite can still be a great advantage because it is lightweight and flexible. Multi-Material Shafts A less common method of shaft construction is the multi-material shaft. You want a wedge that has the proper shape, sole grind and leading edge —and one that best suits both your abilities and shot patterns.

When I was a good player — hey, I used to play a lot before having kids — I once decided to give a set of blades a try with the hopes that it would help me score better. As luck would have it, the blades did make it a cinch to shape shots — I could hit an 8-iron with a yard fade that stopped on a dime. But with that added shot-making playability came a huge price. I lost a massive dose of forgiveness and my misses were significantly worse than they were with my previous set of cavity-backs.

Because I was and still am nowhere near an elite player, I needed forgiveness way more than I needed the ability to shape shots. I needed forgiveness over almost anything else because I frequently miss the sweetspot. Instead, be true to yourself and what you need to play your best golf. Want to really dial in your bag setup?

Shop Golf Club Grips. Shaft - The shaft is a cylindrical piece of graphite or steel connecting the grip to the clubhead.

Shop Golf Club Shafts. Clubhead - The part of the club that strikes the ball, the clubhead controls the height and distance the ball will travel. As the main feature of any club, the clubhead is typically the first thing to consider when choosing clubs. Clubheads are designed with each manufacturer's specific technology attributes and geared towards different player skill levels. Lie angle - The angle measured in degrees formed between the shaft and the ground when the club is placed in its intended address position.

The "1-wood," universally known as the driver, has the largest clubhead, longest shaft and lowest loft aside from the putter of any club. Drivers are long-distance clubs typically used off the tee box for your first shot on a par 4 or par 5. Nearly every driver today features a graphite shaft while clubheads are made of steel, titanium and carbon composites. By rule, a driver clubhead can be up to cc cubic centimeters in size, which makes the cc head the most popular available.

You can find drivers in smaller sizes, such as cc or less, which tend to be used by more skilled players. A general rule, the larger the head, the more forgiving the club will be on off-center contact.

A smaller clubhead gives advanced golfers the ability to purposely curve the ball left draw or right fade. Club manufacturers have made numerous technological advances in recent years. For example, a golfer who wants to hit the ball higher can add loft and position the center of gravity farther back in the clubhead. Clubface technology has advanced as well.

Seeking to max out ball speed — which translates directly to distance — manufacturers have experimented with various materials and thickness across the clubface. To the golfer, this means longer drives on both center and off-center strikes.

The most common fairway woods are the 3- and 5-woods, though many golfers use woods numbered 7, 9 and even higher. The higher the number, the greater the loft of the clubhead and the higher and shorter the shot will travel. Most fairway woods feature graphite shafts, although some have steel shafts.

The clubheads are similar to a driver in shape and materials, but considerably smaller. The fairway woods are mainly used on longer fairway shots as well as tee shots on par 4s and par 5s where accuracy is more important than distance. Shop Fairway Woods. As the name suggests, hybrids combine elements of two different clubs — the clubheads are shaped like woods, while the lengths and lofts are similar to irons.

The majority of amateur golfers, and many pros, use hybrids in place of traditional 2-, 3- and 4-irons as hybrids are easier to hit solidly from a variety of lies. Like fairway woods, hybrids are often used from the tee. What makes hybrids easier to hit than long irons?

A number of factors, including their extremely low center of gravity, which helps get the ball up in the air, and wide sole, which resists digging into the turf. Hybrids are lighter than long irons, too, so golfers can generate more clubhead speed, distance and height. Shop Hybrid Clubs. Irons are used on most every hole and cover everything from chip shots near the green, short and mid-range shots from fairway, rough or sand, and long shots from the tee on par 3s.

Irons generally come in sets that include individual clubs. The typical iron set consists of but is not limited to the 4-, 5-, 6-, 7-, 8-, and 9-irons, along with a pitching wedge and possibly a gap wedge aka approach wedge. This shorthand indicates that all clubs in between are included, so a 3-PW set would include the 3- through 9-irons as well as a pitching wedge. Clubheads on irons have deeper grooves extending across the face from toe to heel and running parallel from top to bottom.

These grooves help generate backspin that's necessary to control your shot. Super or Max Game Improvement Irons — This iron type is a Cavity Back, so-called because of the large "cavity" or hollow portion in the back of the clubhead. The sole is typically wider on on Max Game Improvement Irons to prevent the club from digging into the turf.

The clubface is larger to give the golfer more confidence in hitting a solid shot. Game Improvement Irons — Similar in design to Max Game Improvement Irons but with smaller clubheads and thinner soles, these clubs fit a wide range of skill levels handicap and are the most popular sets. These irons are used by professionals and other highly-skilled golfers.

Most Players Irons are made from forged steel, rather than metal cast in a mold like Game Improvement irons, and boast a pleasing, classic appearance. On the plus side, pure blades let the golfer shape shots more easily than cavity back clubs, which makes them attractive to better players. Players Distance Irons — A fairly recent addition to the family of irons, Players Distance Irons feature the look and feel of Players Irons, but with larger clubheads for an added measure of forgiveness.

Wedges are an extension of the irons, but are usually sold separately except the pitching wedge, which is included with most iron sets. Wedges have more loft and are designed for very high accuracy and more spin than regular irons. Most golfers carry a gap wedge aka an approach wedge and a sand wedge, while the lob wedge is also a popular choice.

The gap wedge is used for full and partial shots from fairway or rough, as well as chips and pitch shots from near the green. The sand wedge is used for most greenside bunker shots as well as many chips and pitches. Used to roll the ball into the hole when on the green or very near it , the putter is arguably the most important club in your bag. Blade Putter — The most commonly used putter style among amateurs and pros, blade putters feature compact clubheads with a more traditional look. Mallet Putter — These feature a much larger head, which may extend several inches behind the clubface.

Engineers have pushed the boundaries with mallet putters, enhancing forgiveness and improving alignment features with creative designs. While still less widely used than blade models, mallets have gained popularity among both pros and amateurs.

There are other factors to consider when shopping for a putter, including alignment technology. Clubmakers have extensively studied how the eyes visualize the line between the ball and the cup, and implemented numerous innovative features to help golfers see the line better at setup. Toe-hang putters work best for golfers with an arc-style stroke, meaning the putter follows a noticeable arc on the backswing and forward swing.

Face-balanced putters are recommended for golfers whose strokes are more straight back and through, with minimal arc. Among other benefits, purchasers receive a month replacement warranty protecting clubs against all manufacturing defects in materials and workmanship. If a club has a factory defect, our commitment is to promptly repair the club, replace it, or issue a credit for the full purchase amount.